Home News Jumbo Offshore completes buoy and manifold campaign for Argentina’s Vaca Muerta oil...

Jumbo Offshore completes buoy and manifold campaign for Argentina’s Vaca Muerta oil export terminal

19
0
The heavy-lift vessel Jumbo Javelin lifting a CALM buoy offshore

Jumbo Offshore has completed the transport and installation campaign for the Vaca Muerta Oil Sur export terminal off the Argentine coast, the Dutch heavy lift contractor has confirmed.

The scope covered two CALM buoys, each weighing approximately 340 tonnes, and two pipeline end manifolds weighing up to 232 tonnes. The work was carried out by the Jumbo Javelin, a dynamically positioned heavy lift vessel, for the client Altius S.A.

The cargo was loaded at Muscat, in Oman, in a double banking ship to ship operation. The vessel then sailed to Argentina by way of the Cape of Good Hope. The pipeline end manifolds were installed at approximately 40 metres of water depth off Punta Colorada, with the terminal itself sitting between five and eight kilometres offshore. Local support was provided through the JSI Alliance. Freek Muurling, project manager at the contractor, led the campaign.

The Vaca Muerta Oil Sur project is the export spine for Argentina's shale oil basin, and the offshore terminal is its final link. A pipeline of 437 kilometres carries crude from the Neuquen basin to the coast, where the loading system that the contractor has now installed transfers it to tankers. The terminal has an initial capacity of up to 550,000 barrels per day, a figure the project expects to raise to 700,000 barrels per day.

That capacity matters more than the engineering. Argentine shale production has for years been constrained less by what the rock can deliver than by what the country can physically move and sell. An offshore loading point of this size changes the arithmetic, because it removes the bottleneck at the existing Atlantic terminals and gives producers a route to international buyers that does not depend on domestic refining capacity.

For the heavy lift sector the campaign is a reminder of how far the work travels. A single vessel loaded fabricated structures in the Gulf of Oman and delivered them to the South Atlantic, a routing that reflects where the fabrication yards sit rather than where the oil is. Contractors that can carry that distance with the deck strength and the station keeping to install at depth operate in a thin market, and the economics of a project like this one are shaped as much by vessel availability as by steel prices.

the contractor has not disclosed the value of the contract, and the release carries no figure. The company describes the campaign as complete, with the terminal now in the hands of its operator.